How it Installation?
Installation instructions
Step 1 :
Disassemble the OEM exhaust system. Starting from the flange end of the downspout, unscrew the flange connection and loosen the clamp at the rear of the particle filter.
Step 2 :
Remove the metal hanger from the OE rubber hanger and the pipeline/sensor from the particle filter. Remove the DPF from the truck.
Step 3 :
Place the welded metal hanger # 1 into the OE rubber hanger, loosely tighten the flanges together, and install the pipe with flanges.
Step 4 :
Next, install the 30814NB pipe. Connect the No.1 pipeline to the muffler pipeline.
Step 5 :
Adjust the gap and appearance of the new system when the pipeline installation is loose. Tighten all clamps evenly, starting from the front flange connection and tightening all the way to the back.
Step 6 :
1.Install the bracket. The M10 bolt will be screwed into the support bolt. Secure the transmission dipstick to the bracket using 1/4-20 bolts, nuts, and washers.
2.The bracket will hold the coolant hose connector in place.
Other Related products
Discover unique designs you'll need
Coolant Filtration Kit
2008-2010 6.4L Ford Powerstroke
Exhaust Up-Pipe
2008-2010 6.4L Ford Powerstroke
Exhaust Up-Pipe
2008-2010 6.4L Ford Powerstroke
4" DPF Delete Muffler
Powerstroke/Duramax/RAM
5" Dp-Back DPF Delete
2008-2010 6.4L Ford Powerstroke
